Flip-It Cap Kit

Step 1
Remove the bottle's original cap or pump when it becomes difficult to get out the remaining product.
Step 2
Determine which parts fit your bottle. It could be the dispensing Stand alone, or in conjunction with an Adapter.
Step 3
If using one of the Adapters, make sure the correct-size gasket is inside, then twist the Adapter onto the bottle.
Step 4
Make sure the XL gasket is inside the Dispensing Stand and twist it onto the Adapter or directly onto the bottle.
flip it bottle emptying kit flip it bottle cap zero waste cap lotion saver bottle emptying kit
bottle stand upside down bottle coupler pump flipit bottle emptying kit bottle funnel
lotion cap lotion saver bottle couplers zero waste flipit cap every drop bottle emptier
flip it bottle emptying kit flip it bottle cap zero waste cap lotion saver bottle emptying kit
Step 5
Lightly tighten the Flip-It! system, and press the valve tip closed before flipping the bottle. (Note: If valve is open, bottles will wobble/fall over to let you know to close the valve.)
Step 6
Flip the bottle upside down and stand it on a solid surface. Allow some time for gravity to move the product down into the Flip-It! Dispensing Stand.
Step 7
To dispense the product, first pull open the valve tip.
Step 8
Squeeze the bottle to get out the desired amount of product, then close the valve tip and keep the bottle standing upside down on the Flip-It!